Product Details:
Packaging Size | 20 Kg |
Usage/ Application | Construction |
Brand | Fosroc |
Packaging Type | Bucket |
Strength | High |
Material Compatibility | Metal |
Chemical Resistance | Automotive Fluids |
Country of Origin | Made in India |
Product DescriptionNitobond EP Std is a two component epoxy bonding agent supplied in pre-weighed quantities for ready on-site mixingand use.
The company provides a technical advisory source supported by a team of specialists in the field.
The entire contents of the hardener Can should be poured into the resin container and the two materials thoroughly mixed until a uniform colour is obtained. To facilitate application at temperatures below 100 C the separate components should be warmed in hot water to a maximum of 250 C before mixing.
Mixed Nitobond EP Std should be brush applied to the prepared substrate. The new concrete should be placed within 3 hours at 350 C to the Nitobond EP Std coated substrate, when it is still in a tacky state.
Tools and equipment shall be cleaned thoroughly after use with Nitoflor Sol.
Actual coverage will depend upon the texture and porosity of the substrates being covered. Typically, 1Litre pack will cover about 2.0-2.5 m2 and 4 litre pack around 8.0 - 10.0m2 .
12 months shelf life when stored under normal wear house conditions below 350 C in unopened containers.
Contact with skin and eyes should be avoided. Gloves should be used when handling these products. If contact with the resin occurs, skin should be washed immediately with strong detergent. A resin removing cream should be used. Eye contamination must be immediately washed with sufficient quantity of water and medical treatment sought